No, there is no requirement for a PC. The Inspex II captures images direct to an internal storage memory (10GB), USB memory stick (up to 4 USB ports) and to a network or cloud server. 

The Inspex II captures files in 24 bitmap file and Jpeg format at a resolution of 1920 x 1080p. This is saved to an internal image capture software. It can also be saved to a removable USB. 

Ash recommends a monitor with a minimum resolution of 1920 x 1080p to achieve optimum image.  Monitors can be purchased as an additional accessory with the Inspex II. Please contact Ash or your local distributor for details of our recommended monitors.

Please note: during initial set-up of your Inspex II unit, please select the monitor size that you will be using. 

Magnification is a combination of both the objective lens used and also the monitor size. The Inspex II displays the current magnification on-screen, which can be configured for different objective lenses and monitor screen sizes. Ash Technologies’ quoted magnifications are based on a 24″ monitor. 

Out of the box, the Inspex II takes less than 10 minutes to set-up. Each order comes with an easy to follow User Manual and Quick Start Guide.

No, you will not need extensive training to utilise the Inspex II’s full system features and apps. The Inspex II has intuitive controls which make it easy to use from the start. Our Inspex II User Manual Guides are there for all of your queries, big or small. Please contact us if you require training help with installation and training. 

All Inspex II units are supplied with a standard wireless mouse. Ensure the “on” switch is switched on and the battery cover tab has been removed from the mouse. Then simply plug the USB wireless dongle into any USB port on the Inspex II and your mouse is ready to use. 

All Inspex II units are supplied with a standard wireless keyboard. Ensure the “on” switch is switched on and the battery cover tab has been removed from the keyboard. Then simply plug the USB wireless dongle into any USB port on the Inspex II, and your keyboard is ready to use. 

A stand is needed to mount the Inspex II. We offer four different options for the Inspex II:

• Track Stand (AI 100-037) features a dual focus block for fine and coarse height adjustment. Track height of 500mm allows easy viewing of small and large samples.. 
• Illuminated Track Stand (AI 100-036) features a dual focus block for fine and coarse focus and height adjustment with integrated LED base illumination with light intensity control. 
• The Dual Arm Boom Stand (AI 100-038) provides an extended reach over large inspection areas. It features a horizontal arm which provides smooth camera movement and a focus block which allows for focus and height adjustment. Weighted base for added stability. Bench clamp version also available.
• The Articulated Arm Stand (AI 100-039) is a multi-point adjustable arm for inspecting over a large area. The articulated arm also features a focus block for focus and height adjustment. It is supplied with a bench clamp.

Please see our accessories page for more information. 

Yes. The objective lenses each have a standard 58mm thread to accept a range of filters (neutral density, colour, UV and polarisation). 

Inspex II illumination accessories are highlighted below:

• Controllable UV Ring Light (AI 801-421), providing optimum shadow-free illumination for a wide range of applications with no external power supply. This is particularly useful for the application of conformance coating of PCB’s. 
• Diffused LED Dome Light (AI 100-045) provides light intensity control and reduces glare with no external power supply. 
• An integrated LED base illumination with light intensity control is also an option for the Track Stand (AI 100-036). 
• Polarised Ringlight & Analyser (AI 801-423) The Polarised Ringlight & Analyser aids the visual inspection of shiny or reflective parts. By simply rotating the Lens Polarising Filter (Analyser), the user can increase or decrease the amount of contrast in the image to highlight defects.
• Substage Polarising Film (MR 801-835): The Sub-Stage Polarising Film is used in conjunction with the Polarised Lens Filter (Analyser). This accessory will aid the user to analyse surface or stress defects when inspecting transparent samples. The Sub-Stage Polarising Film aids visual inspection of transparent parts. By simply rotating the Polarised Lens Filter (Analyser), the user can increase visibility of surface defects.
• Polarizing Lens (Analyzer) 58mm (AI 100-041): The Polarizing Filter helps manage reflections, or suppress glare and is extremely useful for inspecting transparent or reflective objects (when used in conjunction with polarized lighting). The rotational orientation of the filter is adjusted for the preferred effect. Available in both 52mm for Inspex HD and 58mm for Omni and Inspex II.

The Inspex II ships with a standard Quadrant Controllable Ring Light.  For more information on lighting accessories, please visit our lens and lighting accessories page.

The Inspex II has several different lens options to suit your application and requirements. The +5 Lens is shipped with the Inspex II as standard. Additional lens options are as follows:

• +10 Plan 1x Lens (AI 100-055): Plan objectives have a flat field of approximately 95% of the centre of the image. This flatter lens creates less lens distortion than when using a standard lens.
• +25 Lens (AI 100-053): Achieve up to 662x magnification with this high powered lens. Inspect and measure at greater magnification levels than ever before.
• +50 lens (AI 100-064): The +50 lens can only be used with the Inspex II for inspection purposes only. It can reach a maximum magnification is 662x optical and 1324x digital.
• Ash 360⁰ Rotating Viewer (AI 801-422): Inspect objects with a full 360⁰ rotating view, allowing users to rapidly inspect samples from an oblique angle (28⁰ from vertical). Useful for inspecting electronic components, medical devices and metal cutting tools. The rotating viewer easily attaches to the standard Ash lens.